Control Unit Template Code: Description: Hardware: CU RFID CU TechnoGym Locker Controller EX10 CU Keypad 32 CU RFID 32 Locker Controller CU Select Keypad CU Select RFID CU Combo CU Assign RFID CU Delivery Locker Controller EX10 OFF MEW Locker Controller 1 MEW Locker Controller 4 MEW Locker Controller 4 Combo MEW Locker Controller 8 MEW Locker Controller 8 Combo MEW Locker Controller 1 ELS Locker Controller EX10 PPTO MEW Locker Controller 1 PPTO MEW Locker Controller 8 PPTO MEW Locker Controller 8 Combo PPTO MEW ELS Plus Payment: Off On Payment Display: Coin EuroUSdPAYGbP CHF Coin Value: 0,10 0,200,250,50 125 Number of Coins per Locking: 12345 Additional Payment Limit: 1 2345 6789 10111213 14151617 18192021 22232425 26272829 3031 Tenancy: one-time 1h2h3h4h 5h6h7h 8h9h10h 11h12h13h 14h15h16h 17h18h19h 20h21h22h 23h24hunlimited Coin Waiting time: 3s4s5s6s 7s8s9s 10s11s12s 13s14s15s Payment Timeout: 05s10s20s 30s40s50s 1min1min 30s2min 2min 30s3minUnlimited Locking Time: 1h 2h3h4h5h 6h7h8h 9h10h11h12h 13h14h15h16h 17h18h19h20h 21h22h23h24h Alarm seconds Alarm Delay seconds Remote Unlocking User Waiting PIN Length (min): 1234 5 numbers PIN Request Display: PIN COdE Time: 1234 5678 seconds Time Increment 1234 seconds Audio Signal: Off On Locker Trigger Activation Time seconds Special Keys Mode: Off-line On-line

First Previous Next Last Update

Code: Template's ID.

Description: Type-in template's description.

Hardware: Select type of Hardware.

Payment - OFF: Payment is disabled. No tenancy limitations once the Locker is locked.

Payment - On: Payment is enabled. Payment for locker usage is achieved by connecting a Coin acceptor to each Locker Controller (Control Unit).

Payment - Display: Text displayed after coin is inserted.

Payment - Coin Value: Value of coin accepted by the Coin Acceptor

Payment - Number of Coins per Locking: Number of coins required for successful locking. (Requires 4.4.0 Firmware or newer)

Payment - Additional Payment Limit: Number of payments can be set from 1 to 31. If 1 is selected, locker can always be unlocked without additional payment and locker never becomes blocked.

Payment - Tenancy: In what time the locker can be locked again by same ticket without additional payment.

Payment - Coin Waiting time: System waits for chosen number of seconds for coin to be inserted.

Payment - Payment Timeout: If coins are inserted in advance, payment is valid for chosen time and during that time Locker must be closed and ticket presented otherwise the payment is invalid.

Alarm: Alarm beep duration.

Alarm Delay: After the locker is closed, alarm becomes active after entered time.

Remote unlocking: If " - Checked" the Lockers can be opened remotely by pressing the emergency open push button or automatically every single day at set time. See Hardware\Metra Network\Remote Unlocking or Hardware\Metra Network\Templates for additional information.

User Waiting - PIN Length (min): Minimal PIN code length that is accepted as locker key. Example: If set to 4, only 4 digit PIN codes are accepted. If set to 5, only 4 digit PIN codes are accepted and last (fourth) digit entered automatically confirms the entered PIN code and there is no need to press the confirmation key.

User Waiting - PIN Request Display: After the Locker is closed or when unlocking and Pin code is requested, sign "Pin" or sign "Code" can be displayed on the Display.

User Waiting - Time: After the Locker door is closed, system waits for ticket to be presented for chosen number of seconds.

User Waiting - Time increment:  If " - Checked" user waiting time increments (slower countdown) after the countdown ended without presenting the ticket to lock the locker. This gives user more time to present the ticket in second attempt.

User Waiting - Audio Signal: Audio signal volume. Can be disabled "Off" (silent) or enabled "On".

Special Keys Mode: If "Off-line" is selected special keys are downloaded to the device and if "On-line" is selected special keys are checked in real time on Metra server.

Navigation buttons

Update button

( Back )