· Help: Steria - EFTPOS

 

STEP 1:

On each one of your POS computers add folder named "Steria" inside directory "Program Files\Common Files\". (Example: "C:\Program Files\Common Files\Steria")

 

STEP 2:

Download SteriaPAY.ocx.zip and unzip it to previously created folder. Now you should have folder "SteriaPAY.ocx" inside "Steria" folder.

 

STEP 3:

Open folder "SteriaPAY.ocx" and run "SteriaPAY.ocx install.bat".

NOTE: If you are using Windows 7, you must be logged-in as user "Administrator" or run Command Prompt as Administrator, go to SteriaPAY.ocx directory and run the *.bat file.

 

STEP 4:

32-bit Windows: Run "SteriaPay - EFT POS Terminal - OCX Settings - x86.reg"

64-bit Windows: Run "SteriaPay - EFT POS Terminal - OCX Settings - x64.reg"

 

STEP 5:

Open "SteriaPAY.ini" and edit the COM port setting according your configuration.

[CONFIG]
#Com port identifier
ComPort=COM1

#Baud rate
Baudrate=115200

#Log level (1-5), where 1 is most detailed and 5 is no logging
Loglevel=3

#BAX number
#BAX=123456

 

NOTE:

OCX will work with default settings even if it is registered somewhere else on the POS PC, but if change of COM port is needed, the registry entries must point to where the StriaPay.ini file is located on the hard drive. Port can then be defined in the "SteriaPAY.ini" file.

 

STEP 6 - Metra Software Settings:

Checked "EFT POS Steria" under Interfaces on the System page.

Edit "EFT POS Steria - POS Button Caption" on Settings page.

Add new document templates for EFT POS and EFT POS Report on Document Templates page.

Select created templates for POS computer on Points of Sale Add & Edit page.

 

STEP 7:

Button for EFT POS should now be available in Metra POS software on selected POS computers.

  

( Back )