Reports | Events | View | Tables | Hardware | Setup | Settings | System | Info Master Keys | Master Codes | Lockers | Access | Vending | Metra NET | Download File

Master Key - *See below Code: Description: Enabled Passage: All(1) Demo room main entrance(2) Sauna *See below

First Previous Next Last Update

Code: Master Key's ID.

Description: Type-in Master Key's description. Should be used to describe Master Key's owner.

Enabled: If " - Checked" Master Key is enabled.

Passage: Select on which Passage the Master Key is valid. NOTE: If you want that a Master Key is valid on more than one passage at the same time, but  not on all passages, add the same RFID Media as several Master Keys with different passages selected.

Club/Customer Code & Chip ID/Serial Number & Card Number & Application/Card Number:  See bellow...

Navigation buttons

Update button

( Back )  ( Master Keys )

APPLICATION:

ELS 0002 - TechnoGym | ELS 0003 - SkiData | ELS 0004 - Gemplus Tag | ELS 0006 - Mifare | ELS 0007 - Metra LCC | ELS 0008 - Legic | ELS 0009 - ISO 15693 | ELS 000A - MagStripe | ELS 000B - LF Tag

ELS 0002 - TechnoGym

Club/Customer Code: Desktop POS Reader must be connected! Click on button. After you are prompted, insert the TechnoGym key into the TechnoGym Reader. Club and customer code will be read and saved. You can also manually type in Club and customer codes.

ELS 0003 - SkiData & ELS 0004 Gemplus Tag

Chip ID/Serial Number: Desktop POS Reader must be connected! Click on button. After you are prompted, approach with the RFID media (card, wristband, key ring, clip, etc.) to the Desktop POS Reader's antenna field. Chip ID and Serial number of the RFID media will be read and saved. You can also manually type in the Chip ID and Serial number.

ELS 0006 - Mifare & ELS 0008 - LegicELS & 0009 - ISO 15693 & ELS 000A - MagStripe & ELS 000B - LF Tag

Card Number: Desktop POS Reader must be connected! Click on button. After you are prompted, approach with the RFID media (card, wristband, key ring, clip, etc.) to the Desktop POS Reader's antenna field. Serial number of the RFID media will be read and saved. You can also manually type in the Card number.

ELS 0007 - Metra LCC

Application/Card Number: Desktop POS Reader must be connected! Click on button. After you are prompted, approach with the RFID media (card, wristband, key ring, clip, etc.) to the Desktop POS Reader's antenna field. Application code and Card number of the RFID media will be read and saved. You can also manually type in the Application code and Card number. Application code is system specific.

( Back )  ( Master Keys )